CRC校验解析

UdpServerCMD/Program.cs

@@ -591,7 +591,7 @@ namespace UdpServerCMD
                 DataLength.Append(message[i]);
             }
             int.Parse(hexStr2Str(DataLength.ToString()));
-            Console.WriteLine("数据部长度:" + int.Parse(hexStr2Str(DataLength.ToString())));
+            //Console.WriteLine("数据部长度:" + int.Parse(hexStr2Str(DataLength.ToString())));
 
 
             StringBuilder SimID = new StringBuilder(""); //客户端地址A -- 11位时编码需在最后一字节低四位补 F
@@ -609,7 +609,7 @@ namespace UdpServerCMD
                     SimID.Append(message[i]);
                 }
             }
-            Console.WriteLine("客户端地址:" + SimID);
+            //Console.WriteLine("客户端地址:" + SimID);
 
 
             StringBuilder _voltage = new StringBuilder("");//电压 --缩小10 倍为实际数值
@@ -619,7 +619,7 @@ namespace UdpServerCMD
                 _voltage.Append(message[i]);
             }
             voltage = float.Parse(_voltage.ToString()) / 10;
-            Console.WriteLine("电压:" + voltage);
+            //Console.WriteLine("电压:" + voltage);
 
 
             StringBuilder _signal = new StringBuilder("");//信号 --信号为整数
@@ -629,7 +629,7 @@ namespace UdpServerCMD
                 _signal.Append(message[i]);
             }
             signal = int.Parse(_signal.ToString());
-            Console.WriteLine("信号:" + signal);
+            //Console.WriteLine("信号:" + signal);
 
 
             StringBuilder date = new StringBuilder("20");//日期 --(BCD 码)
@@ -640,7 +640,7 @@ namespace UdpServerCMD
                 else if (i == 33 || i == 35) date.Append(message[i] + ":");
                 else date.Append(message[i]);
             }
-            Console.WriteLine("日期:" + date);
+            //Console.WriteLine("日期:" + date);
 
 
             StringBuilder workPattern = new StringBuilder("");//工作模式 --0x00 定时开机，0x01 实时在线
@@ -648,6 +648,119 @@ namespace UdpServerCMD
             {
                 workPattern.Append(message[i]);
             }
+            //switch ((TypeworkPattern)int.Parse(workPattern.ToString()))
+            //{
+            //    case TypeworkPattern.定时开机:
+            //        Console.WriteLine(TypeworkPattern.定时开机);
+            //        break;
+            //    case TypeworkPattern.实时在线:
+            //        Console.WriteLine(TypeworkPattern.实时在线);
+            //        break;
+            //    default:
+            //        break;
+            //}
+
+
+            StringBuilder _meterNumber = new StringBuilder("");//仪表数量
+            StringBuilder meterNumber = new StringBuilder("");//仪表数量
+            for (int i = 40; i <= 41; i++)
+            {
+                _meterNumber.Append(message[i]);
+            }
+            meterNumber.Append(int.Parse(_meterNumber.ToString()).ToString() + "台");
+            //Console.WriteLine("仪表数量:" + meterNumber);
+
+
+            StringBuilder positionNumber = new StringBuilder("");//位置号 --取低 4 位为实际值
+            for (int i = 42; i <= 43; i++)
+            {
+                //if (i == 42) continue;//取低 4 位为实际值
+                positionNumber.Append(message[i]);
+            }
+            //Console.WriteLine("位置号:" + getLow4(byte.Parse(hexStr2Str(positionNumber.ToString()))) + "号");
+
+
+            StringBuilder phenotype = new StringBuilder("");//表型
+            for (int i = 44; i <= 45; i++)
+            {
+                phenotype.Append(message[i]);
+            }
+            //typePheno(phenotype);
+
+
+            StringBuilder versionMumber = new StringBuilder("");//版本号 --开始字节4A
+            for (int i = 46; i <= 87; i++)
+            {
+                if (i == 46 || i == 47) continue;
+                versionMumber.Append(message[i]);
+            }
+            versionMumber = hexToASCII(versionMumber.ToString());
+            //Console.WriteLine("版本号" + versionMumber);
+
+
+            StringBuilder reportingCycle = new StringBuilder("");//上报周期 --开始字节4B。115 ：15分钟 ，130:30 分钟，24:24小时
+            for (int i = 88; i <= 91; i++)
+            {
+                if (i == 88 || i == 89) continue;
+                reportingCycle.Append(message[i]);
+            }
+            //if (int.Parse(hexStr2Str(reportingCycle.ToString())) != 24)
+            //{
+            //    var v = new StringBuilder(hexStr2Str(reportingCycle.ToString()));
+            //    v.Remove(0, 2);
+            //    Console.WriteLine("上报周期: " + v + "h");
+            //}
+            //else if (int.Parse(hexStr2Str(reportingCycle.ToString())) == 24)
+            //{
+            //    Console.WriteLine("上报周期: " + int.Parse(hexStr2Str(reportingCycle.ToString())) + "h");
+            //}
+
+
+            StringBuilder acquisitionCycle = new StringBuilder("");//采集周期 --开始字节4C。高字节在前，单位：秒
+            for (int i = 92; i <= 97; i++)
+            {
+                if (i == 92 || i == 93) continue;
+                acquisitionCycle.Append(message[i]);
+            }
+            Convert.ToInt64(acquisitionCycle.ToString(), 16);
+            //Console.WriteLine("采集周期:" + Convert.ToInt64(acquisitionCycle.ToString(), 16) / 60 + "分钟");
+
+
+            StringBuilder factoryCode = new StringBuilder("");//出厂编码 --开始字节4D。ASCII码
+            for (int i = 98; i <= 127; i++)
+            {
+                if (i == 98 || i == 99) continue;
+                factoryCode.Append(message[i]);
+            }
+            hexToASCII(factoryCode.ToString());
+            //Console.WriteLine("出厂编码:" + hexToASCII(factoryCode.ToString()));
+
+
+            StringBuilder retain = new StringBuilder("");//保留 --开始字节4F。不做处理
+            for (int i = 128; i <= 145; i++)
+            {
+                if (i == 128 || i == 129) continue;
+                retain.Append(message[i]);
+            }
+
+            //CRC校验
+            StringBuilder builder = new StringBuilder("");
+            for (int i = message.Length - 6; i < message.Length; i++)
+            {
+                builder.Append(message[i]);
+            }
+            if (binAccumulation(4, 145, message).ToUpper() != builder.ToString().ToUpper())
+            {
+                Console.WriteLine("接收数据校验失败" + ": " + message);
+                log.Info("登录帧校验失败" + ": " + message);
+                return;
+            }
+
+            Console.WriteLine("数据部长度:" + int.Parse(hexStr2Str(DataLength.ToString())));
+            Console.WriteLine("客户端地址:" + SimID);
+            Console.WriteLine("电压:" + voltage);
+            Console.WriteLine("信号:" + signal);
+            Console.WriteLine("日期:" + date);
             switch ((TypeworkPattern)int.Parse(workPattern.ToString()))
             {
                 case TypeworkPattern.定时开机:
@@ -659,91 +772,22 @@ namespace UdpServerCMD
                 default:
                     break;
             }
-
-
-            StringBuilder _meterNumber = new StringBuilder("");//仪表数量
-            StringBuilder meterNumber = new StringBuilder("");//仪表数量
-            for (int i = 40; i <= 41; i++)
-            {
-                _meterNumber.Append(message[i]);
-            }
-            meterNumber.Append(int.Parse(_meterNumber.ToString()).ToString() + "台");
             Console.WriteLine("仪表数量:" + meterNumber);
-
-
-            StringBuilder positionNumber = new StringBuilder("");//位置号 --取低 4 位为实际值
-            for (int i = 42; i <= 43; i++)
-            {
-                //if (i == 42) continue;//取低 4 位为实际值
-                positionNumber.Append(message[i]);
-            }
             Console.WriteLine("位置号:" + getLow4(byte.Parse(hexStr2Str(positionNumber.ToString()))) + "号");
-
-
-            StringBuilder phenotype = new StringBuilder("");//表型
-            for (int i = 44; i <= 45; i++)
-            {
-                phenotype.Append(message[i]);
-            }
             typePheno(phenotype);
-
-
-            StringBuilder versionMumber = new StringBuilder("");//版本号 --开始字节4A
-            for (int i = 46; i <= 87; i++)
-            {
-                if (i == 46 || i == 47) continue;
-                versionMumber.Append(message[i]);
-            }
-            versionMumber = hexToASCII(versionMumber.ToString());
             Console.WriteLine("版本号" + versionMumber);
-
-
-            StringBuilder reportingCycle = new StringBuilder("");//上报周期 --开始字节4B。115 ：15分钟 ，130:30 分钟，24:24小时
-            for (int i = 88; i <= 91; i++)
-            {
-                if (i == 88 || i == 89) continue;
-                reportingCycle.Append(message[i]);
-            }
             if (int.Parse(hexStr2Str(reportingCycle.ToString())) != 24)
             {
                 var v = new StringBuilder(hexStr2Str(reportingCycle.ToString()));
                 v.Remove(0, 2);
-                Console.WriteLine(v + "h");
+                Console.WriteLine("上报周期: " + v + "h");
             }
             else if (int.Parse(hexStr2Str(reportingCycle.ToString())) == 24)
             {
-                Console.WriteLine(int.Parse(hexStr2Str(reportingCycle.ToString())) + "h");
+                Console.WriteLine("上报周期: " + int.Parse(hexStr2Str(reportingCycle.ToString())) + "h");
             }
-
-
-            StringBuilder acquisitionCycle = new StringBuilder("");//采集周期 --开始字节4C。高字节在前，单位：秒
-            for (int i = 92; i <= 97; i++)
-            {
-                if (i == 92 || i == 93) continue;
-                acquisitionCycle.Append(message[i]);
-            }
-            Convert.ToInt64(acquisitionCycle.ToString(), 16);
             Console.WriteLine("采集周期:" + Convert.ToInt64(acquisitionCycle.ToString(), 16) / 60 + "分钟");
-
-
-            StringBuilder factoryCode = new StringBuilder("");//出厂编码 --开始字节4D。ASCII码
-            for (int i = 98; i <= 127; i++)
-            {
-                if (i == 98 || i == 99) continue;
-                factoryCode.Append(message[i]);
-            }
-            hexToASCII(factoryCode.ToString());
             Console.WriteLine("出厂编码:" + hexToASCII(factoryCode.ToString()));
-
-
-            StringBuilder retain = new StringBuilder("");//保留 --开始字节4F。不做处理
-            for (int i = 128; i <= 145; i++)
-            {
-                if (i == 128 || i == 129) continue;
-                retain.Append(message[i]);
-            }
-
-
             Console.WriteLine("校验位CS:" + binAccumulation(4, 145, message));
 
 
@@ -1132,28 +1176,28 @@ namespace UdpServerCMD
                 baseNum = (68 + 16);
             }
 
-            shareAnalysis(message, multiplier);
+            //shareAnalysis(message, multiplier);
 
             StringBuilder validity = new StringBuilder("");//抄表数据有效 --无符号整型，0x26 有效，其他无效
             for (int i = 44 + multiplier; i <= 45 + multiplier; i++)
             {
                 validity.Append(message[i]);
             }
-            if (validity.ToString() == "26")
-            {
-                Console.WriteLine("抄表数据有效");
-            }
-            else
-            {
-                Console.WriteLine("抄表数据无效");
-            }
+            //if (validity.ToString() == "26")
+            //{
+            //    Console.WriteLine("抄表数据有效");
+            //}
+            //else
+            //{
+            //    Console.WriteLine("抄表数据无效");
+            //}
 
             StringBuilder versionNum = new StringBuilder(""); //版本号 --整型
             for (int i = 46 + multiplier; i <= 47 + multiplier; i++)
             {
                 versionNum.Append(message[i]);
             }
-            Console.WriteLine("版本号:" + int.Parse(versionNum.ToString()));
+            //Console.WriteLine("版本号:" + int.Parse(versionNum.ToString()));
 
             StringBuilder instantaneousFlow = new StringBuilder("");//瞬时流量 --浮点型，缩小 1000 倍为实际值，单位： m3/h
             for (int i = 48 + multiplier; i <= 55 + multiplier; i++)
@@ -1161,7 +1205,7 @@ namespace UdpServerCMD
                 instantaneousFlow.Append(message[i]);
             }
             var _instantaneousFlow = byteToFloat(instantaneousFlow.ToString()) / 1000;
-            Console.WriteLine("瞬时流量" + _instantaneousFlow.ToString() + "m3/h");
+            //Console.WriteLine("瞬时流量" + _instantaneousFlow.ToString() + "m3/h");
 
             StringBuilder _positiveFlow = new StringBuilder("");//累积流量 --带符号整型，低字节在前，高字节在后，缩小 10 倍为实际数值，单位： m3。
             for (int i = 56 + multiplier; i <= 63 + multiplier; i++)
@@ -1169,7 +1213,7 @@ namespace UdpServerCMD
                 _positiveFlow.Append(message[i]);
             }
             int positiveFlow = int.Parse(/*hexStr2Str*/(interconvert(56 + multiplier, 63 + multiplier, _positiveFlow.ToString()))) / 10;//???
-            Console.WriteLine("累积流量:" + positiveFlow + "m3");
+            //Console.WriteLine("累积流量:" + positiveFlow + "m3");
 
             StringBuilder waterTemperature = new StringBuilder("");//水温 --浮点型，单位： ℃
             for (int i = 64 + multiplier; i <= 71 + multiplier; i++)
@@ -1177,7 +1221,7 @@ namespace UdpServerCMD
                 waterTemperature.Append(message[i]);
             }
             var _waterTemperature = byteToFloat(waterTemperature.ToString());//???
-            Console.WriteLine("水温:" + _waterTemperature + "℃");
+            //Console.WriteLine("水温:" + _waterTemperature + "℃");
 
             StringBuilder _RunTime = new StringBuilder("");//累积运行时间 --带符号整型，低字节在前，高字节在后，单位： h
             for (int i = 72 + multiplier; i <= 79 + multiplier; i++)
@@ -1185,7 +1229,7 @@ namespace UdpServerCMD
                 _RunTime.Append(message[i]);
             }
             int RunTime = int.Parse(/*hexStr2Str*/(interconvert(72 + multiplier, 79 + multiplier, _RunTime.ToString())));//???
-            Console.WriteLine("累积运行时间:" + RunTime + "h");
+            //Console.WriteLine("累积运行时间:" + RunTime + "h");
 
             StringBuilder _cellVoltage = new StringBuilder("");//电池电压 --浮点型，低字节在前，高字节在后，单位： v。
             for (int i = 80 + multiplier; i <= 87 + multiplier; i++)
@@ -1194,7 +1238,7 @@ namespace UdpServerCMD
             }
             //float cellVoltage = float.Parse(/*hexStr2Str*/(interconvert(80 + multiplier, 87 + multiplier, _cellVoltage.ToString())));
             float cellVoltage = byteToFloat(_cellVoltage.ToString());//???
-            Console.WriteLine("电池电压:" + cellVoltage + "v");
+            //Console.WriteLine("电池电压:" + cellVoltage + "v");
 
             StringBuilder _pipeSize = new StringBuilder("");//管径 --浮点型，单位： mm
             for (int i = 88 + multiplier; i <= 95 + multiplier; i++)
@@ -1203,14 +1247,14 @@ namespace UdpServerCMD
             }
             //float pipeSize = float.Parse(_pipeSize.ToString());
             float pipeSize = byteToFloat(_pipeSize.ToString());//???
-            Console.WriteLine("管径:" + pipeSize + "mm");
+            //Console.WriteLine("管径:" + pipeSize + "mm");
 
             StringBuilder capacity = new StringBuilder("");//量程 --长整型，单位：单位缺失。
             for (int i = 96 + multiplier; i <= 103 + multiplier; i++)
             {
                 capacity.Append(message[i]);
             }
-            Console.WriteLine("量程:" + interconvert(0, 0, capacity.ToString()));//???
+            //Console.WriteLine("量程:" + interconvert(0, 0, capacity.ToString()));//???
 
             StringBuilder dampingFactor = new StringBuilder("");//阻尼系数 --ASCII 码
             for (int i = 104 + multiplier; i <= 105 + multiplier; i++)
@@ -1230,6 +1274,40 @@ namespace UdpServerCMD
             {
                 diagnose.Append(message[i]);
             }
+            //typeMalfunction(diagnose);
+
+
+            //CRC校验
+            StringBuilder builder = new StringBuilder("");
+            for (int i = 112 + multiplier; i <= 113 + multiplier; i++)
+            {
+                builder.Append(message[i]);
+            }
+            if (binAccumulation(4 + multiplier, 111 + multiplier, message).ToUpper() != builder.ToString().ToUpper())
+            {
+                Console.WriteLine("接收数据校验失败" + ": " + message);
+                log.Info("登录帧校验失败" + ": " + message);
+                Isgo(message, baseNum);
+                return;
+            }
+
+            shareAnalysis(message, multiplier);
+            if (validity.ToString() == "26")
+            {
+                Console.WriteLine("抄表数据有效");
+            }
+            else
+            {
+                Console.WriteLine("抄表数据无效");
+            }
+            Console.WriteLine("版本号:" + int.Parse(versionNum.ToString()));
+            Console.WriteLine("瞬时流量" + _instantaneousFlow.ToString() + "m3/h");
+            Console.WriteLine("累积流量:" + positiveFlow + "m3");
+            Console.WriteLine("水温:" + _waterTemperature + "℃");
+            Console.WriteLine("累积运行时间:" + RunTime + "h");
+            Console.WriteLine("电池电压:" + cellVoltage + "v");
+            Console.WriteLine("管径:" + pipeSize + "mm");
+            Console.WriteLine("量程:" + interconvert(0, 0, capacity.ToString()));//???
             typeMalfunction(diagnose);
 
             //数据校验 --版本号-故障代码
@@ -1260,28 +1338,28 @@ namespace UdpServerCMD
                 baseNum = (84 + 16);
             }
 
-            shareAnalysis(message, multiplier);
+            //shareAnalysis(message, multiplier);
 
             StringBuilder validity = new StringBuilder("");//抄表数据有效 --无符号整型，0x26 有效，其他无效
             for (int i = 44 + multiplier; i <= 45 + multiplier; i++)
             {
                 validity.Append(message[i]);
             }
-            if (validity.ToString() == "26")
-            {
-                Console.WriteLine("抄表数据有效");
-            }
-            else
-            {
-                Console.WriteLine("抄表数据无效");
-            }
+            //if (validity.ToString() == "26")
+            //{
+            //    Console.WriteLine("抄表数据有效");
+            //}
+            //else
+            //{
+            //    Console.WriteLine("抄表数据无效");
+            //}
 
             StringBuilder versionNum = new StringBuilder(""); //版本号 --整型
             for (int i = 46 + multiplier; i <= 47 + multiplier; i++)
             {
                 versionNum.Append(message[i]);
             }
-            Console.WriteLine("版本号:" + int.Parse(versionNum.ToString()));
+            //Console.WriteLine("版本号:" + int.Parse(versionNum.ToString()));
 
             StringBuilder instantaneousFlow = new StringBuilder("");//瞬时流量 --浮点型，缩小 1000 倍为实际值，单位： m3/h
             for (int i = 48 + multiplier; i <= 55 + multiplier; i++)
@@ -1289,7 +1367,7 @@ namespace UdpServerCMD
                 instantaneousFlow.Append(message[i]);
             }
             //Console.WriteLine("瞬时流量" + float.Parse(instantaneousFlow.ToString()) / 1000 + "m3/h");//???
-            Console.WriteLine("瞬时流量" + byteToFloat(instantaneousFlow.ToString()) / 1000 + "m3/h");
+            //Console.WriteLine("瞬时流量" + byteToFloat(instantaneousFlow.ToString()) / 1000 + "m3/h");
 
             StringBuilder _positiveFlow = new StringBuilder("");//正累积流量 --带符号整型，低字节在前，高字节在后，缩小 10 倍为实际数值，单位： m3
             for (int i = 56 + multiplier; i <= 63 + multiplier; i++)
@@ -1298,7 +1376,7 @@ namespace UdpServerCMD
             }
             //int positiveFlow = int.Parse(hexStr2Str(interconvert(56 + multiplier, 63 + multiplier, _positiveFlow.ToString()))) / 10;//???
             var positiveFlow = float.Parse(/*hexStr2Str*/(interconvert(56 + multiplier, 63 + multiplier, _positiveFlow.ToString()))) / 10;
-            Console.WriteLine("正累积流量:" + positiveFlow + "m3");
+            //Console.WriteLine("正累积流量:" + positiveFlow + "m3");
 
             StringBuilder loseFlow = new StringBuilder("");//负累积流量 --BCD 码，缩小10 倍为实际数值，单位：m³
             for (int i = 64 + multiplier; i <= 71 + multiplier; i++)
@@ -1306,7 +1384,7 @@ namespace UdpServerCMD
                 loseFlow.Append(message[i]);
             }
             var _loseFlow = float.Parse(loseFlow.ToString()) / 10;
-            Console.WriteLine("负累积流量:" + _loseFlow + "m3");
+            //Console.WriteLine("负累积流量:" + _loseFlow + "m3");
 
             StringBuilder loseRunTime = new StringBuilder("");//负累积运行时间 --BCD 码，单位： h。
             for (int i = 72 + multiplier; i <= 79 + multiplier; i++)
@@ -1314,7 +1392,7 @@ namespace UdpServerCMD
                 loseRunTime.Append(message[i]);
             }
             var _loseRunTime = int.Parse(loseRunTime.ToString());
-            Console.WriteLine("负累积运行时间:" + _loseRunTime + "h");
+            //Console.WriteLine("负累积运行时间:" + _loseRunTime + "h");
 
             StringBuilder waterTemperature = new StringBuilder("");//水温 --浮点型，单位： ℃
             for (int i = 80 + multiplier; i <= 87 + multiplier; i++)
@@ -1322,7 +1400,7 @@ namespace UdpServerCMD
                 waterTemperature.Append(message[i]);
             }
             var _waterTemperature = byteToFloat(waterTemperature.ToString());//???
-            Console.WriteLine("水温:" + _waterTemperature + "℃");
+            //Console.WriteLine("水温:" + _waterTemperature + "℃");
 
             StringBuilder _RunTime = new StringBuilder("");//累积运行时间 --带符号整型，低字节在前，高字节在后，单位： h
             for (int i = 88 + multiplier; i <= 95 + multiplier; i++)
@@ -1330,7 +1408,7 @@ namespace UdpServerCMD
                 _RunTime.Append(message[i]);
             }
             var RunTime = int.Parse(/*hexStr2Str*/(interconvert(88 + multiplier, 95 + multiplier, _RunTime.ToString())));//???
-            Console.WriteLine("累积运行时间:" + RunTime + "h");
+            //Console.WriteLine("累积运行时间:" + RunTime + "h");
 
             StringBuilder _cellVoltage = new StringBuilder("");//电池电压 --浮点型，低字节在前，高字节在后，单位： v。
             for (int i = 96 + multiplier; i <= 103 + multiplier; i++)
@@ -1339,7 +1417,7 @@ namespace UdpServerCMD
             }
             //float cellVoltage = float.Parse(hexStr2Str(interconvert(96 + multiplier, 103 + multiplier, _cellVoltage.ToString())));//???
             float cellVoltage = byteToFloat(_cellVoltage.ToString());
-            Console.WriteLine("电池电压:" + cellVoltage + "v");
+            //Console.WriteLine("电池电压:" + cellVoltage + "v");
 
             StringBuilder _pipeSize = new StringBuilder("");//管径 --浮点型，单位： mm
             for (int i = 104 + multiplier; i <= 111 + multiplier; i++)
@@ -1348,14 +1426,14 @@ namespace UdpServerCMD
             }
             //float pipeSize = float.Parse(_pipeSize.ToString());//???
             float pipeSize = byteToFloat(_pipeSize.ToString());
-            Console.WriteLine("管径:" + pipeSize + "mm");
+            //Console.WriteLine("管径:" + pipeSize + "mm");
 
             StringBuilder capacity = new StringBuilder("");//量程 --长整型，单位：单位缺失。
             for (int i = 112 + multiplier; i <= 119 + multiplier; i++)
             {
                 capacity.Append(message[i]);
             }
-            Console.WriteLine("量程:" + interconvert(0, 0, capacity.ToString()));//???
+            //Console.WriteLine("量程:" + interconvert(0, 0, capacity.ToString()));//???
 
             StringBuilder dampingFactor = new StringBuilder("");//阻尼系数 --ASCII 码
             for (int i = 120 + multiplier; i <= 121 + multiplier; i++)
@@ -1375,6 +1453,43 @@ namespace UdpServerCMD
             {
                 diagnose.Append(message[i]);
             }
+            //typeMalfunction(diagnose);
+
+
+            //CRC校验
+            StringBuilder builder = new StringBuilder("");
+            for (int i = 128 + multiplier; i <= 129 + multiplier; i++)
+            {
+                builder.Append(message[i]);
+            }
+            if (binAccumulation(4 + multiplier, 127 + multiplier, message).ToUpper() != builder.ToString().ToUpper())
+            {
+                Console.WriteLine("接收数据校验失败" + ": " + message);
+                log.Info("登录帧校验失败" + ": " + message);
+                Isgo(message, baseNum);
+                return;
+            }
+
+            shareAnalysis(message, multiplier);
+            if (validity.ToString() == "26")
+            {
+                Console.WriteLine("抄表数据有效");
+            }
+            else
+            {
+                Console.WriteLine("抄表数据无效");
+            }
+            Console.WriteLine("版本号:" + int.Parse(versionNum.ToString()));
+            Console.WriteLine("瞬时流量" + byteToFloat(instantaneousFlow.ToString()) / 1000 + "m3/h");
+            Console.WriteLine("正累积流量:" + positiveFlow + "m3");
+            Console.WriteLine("负累积流量:" + _loseFlow + "m3");
+            Console.WriteLine("负累积运行时间:" + _loseRunTime + "h");
+            Console.WriteLine("水温:" + _waterTemperature + "℃");
+            Console.WriteLine("累积运行时间:" + RunTime + "h");
+            Console.WriteLine("电池电压:" + cellVoltage + "v");
+            Console.WriteLine("管径:" + pipeSize + "mm");
+            Console.WriteLine("量程:" + interconvert(0, 0, capacity.ToString()));//???
+            //Console.WriteLine("阻尼系数:" + hexToASCII(dampingFactor.ToString()));
             typeMalfunction(diagnose);
 
             //数据校验 --版本号-故障代码
@@ -1405,13 +1520,128 @@ namespace UdpServerCMD
                 baseNum = (64 + 16);
             }
 
-            shareAnalysis(message, multiplier);
+            //shareAnalysis(message, multiplier);
 
             StringBuilder validity = new StringBuilder("");//抄表数据有效 --无符号整型，0x26 有效，其他无效
             for (int i = 44 + multiplier; i <= 45 + multiplier; i++)
             {
                 validity.Append(message[i]);
             }
+            //if (validity.ToString() == "26")
+            //{
+            //    Console.WriteLine("抄表数据有效");
+            //}
+            //else
+            //{
+            //    Console.WriteLine("抄表数据无效");
+            //}
+
+
+            StringBuilder signDelivery = new StringBuilder("");//瞬时流量正负值 --无符号整型，0x00 代表正，0x0a 代表负
+            for (int i = 46 + multiplier; i <= 47 + multiplier; i++)
+            {
+                signDelivery.Append(message[i]);
+            }
+            //if (signDelivery.ToString() == "00")
+            //{
+            //    signDelivery.Clear().Append("");
+            //    Console.WriteLine("瞬时流量为正值");
+            //}
+            //else
+            //{
+            //    signDelivery.Clear().Append("-");
+            //    Console.WriteLine("瞬时流量为负值");
+            //}
+
+
+            StringBuilder instantaneousFlow = new StringBuilder(""); //瞬时流量 --缩小 1000 倍为实际值，单位： m3/h
+            for (int i = 48 + multiplier; i <= 55 + multiplier; i++)
+            {
+                instantaneousFlow.Append(message[i]);
+            }
+            var _instantaneousFlow = float.Parse(instantaneousFlow.ToString()) / 1000;
+            //Console.WriteLine("瞬时流量:" + signDelivery + _instantaneousFlow + "m3/h");
+
+
+            StringBuilder loseFlow = new StringBuilder("");//负累积流量 --缩小 10 倍为实际数值，单位： m3
+            for (int i = 56 + multiplier; i <= 63 + multiplier; i++)
+            {
+                loseFlow.Append(message[i]);
+            }
+            var _loseFlow = float.Parse(loseFlow.ToString()) / 10;
+            //Console.WriteLine("负累积流量:" + signDelivery + _loseFlow + "m3");
+
+
+            StringBuilder loseRunTime = new StringBuilder("");//负累积运行时间 --单位: h
+            for (int i = 64 + multiplier; i <= 71 + multiplier; i++)
+            {
+                loseRunTime.Append(message[i]);
+            }
+            var _loseRunTime = int.Parse(loseRunTime.ToString());
+            //Console.WriteLine("负累积运行时间:" + _loseRunTime + "h");
+
+
+            StringBuilder positiveFlow = new StringBuilder("");//正累积流量 --缩小 10 倍为实际数值，单位： m3
+            for (int i = 72 + multiplier; i <= 79 + multiplier; i++)
+            {
+                positiveFlow.Append(message[i]);
+            }
+            var _positiveFlow = float.Parse(positiveFlow.ToString()) / 10;
+            //Console.WriteLine("正累积流量:" + _positiveFlow + "m3");
+
+
+
+            StringBuilder positiveRunTime = new StringBuilder("");//正累积运行时间 --单位: h
+            for (int i = 80 + multiplier; i <= 87 + multiplier; i++)
+            {
+                positiveRunTime.Append(message[i]);
+            }
+            var _positiveRunTime = int.Parse(positiveRunTime.ToString());
+            //Console.WriteLine("正累积运行时间:" + _positiveRunTime + "h");
+
+
+            StringBuilder waterTemperature = new StringBuilder("");//水温 --缩小 100 倍为实际数值，单位： ℃
+            for (int i = 88 + multiplier; i <= 95 + multiplier; i++)
+            {
+                waterTemperature.Append(message[i]);
+            }
+            var _waterTemperature = float.Parse(waterTemperature.ToString()) / 100;
+            //Console.WriteLine("水温:" + _waterTemperature + "℃");
+
+
+            StringBuilder pressure = new StringBuilder("");//压力 --缩小 1000 倍为实际数值，单位： mpa
+            for (int i = 96 + multiplier; i <= 103 + multiplier; i++)
+            {
+                pressure.Append(message[i]);
+            }
+            var _pressure = float.Parse(pressure.ToString()) / 1000;
+            //Console.WriteLine("压力:" + _pressure + "mpa");
+
+
+            StringBuilder diagnose = new StringBuilder("");//诊断代码(仪表故障码) --当设备上报 0x06 故障时，不应再上报其他故障。
+            for (int i = 104 + multiplier; i <= 105 + multiplier; i++)
+            {
+                diagnose.Append(message[i]);
+            }
+            //typeMalfunction(diagnose);
+
+
+            //CRC校验
+            StringBuilder builder = new StringBuilder("");
+            for (int i = 108 + multiplier; i <= 109 + multiplier; i++)
+            {
+                builder.Append(message[i]);
+            }
+            if (binAccumulation(4 + multiplier, 107 + multiplier, message).ToUpper() != builder.ToString().ToUpper())
+            {
+                Console.WriteLine("接收数据校验失败" + ": " + message);
+                log.Info("登录帧校验失败" + ": " + message);
+                Isgo(message, baseNum);
+                return;
+            }
+
+            shareAnalysis(message, multiplier);
+
             if (validity.ToString() == "26")
             {
                 Console.WriteLine("抄表数据有效");
@@ -1420,13 +1650,6 @@ namespace UdpServerCMD
             {
                 Console.WriteLine("抄表数据无效");
             }
-
-
-            StringBuilder signDelivery = new StringBuilder("");//瞬时流量正负值 --无符号整型，0x00 代表正，0x0a 代表负
-            for (int i = 46 + multiplier; i <= 47 + multiplier; i++)
-            {
-                signDelivery.Append(message[i]);
-            }
             if (signDelivery.ToString() == "00")
             {
                 signDelivery.Clear().Append("");
@@ -1437,77 +1660,13 @@ namespace UdpServerCMD
                 signDelivery.Clear().Append("-");
                 Console.WriteLine("瞬时流量为负值");
             }
-
-
-            StringBuilder instantaneousFlow = new StringBuilder(""); //瞬时流量 --缩小 1000 倍为实际值，单位： m3/h
-            for (int i = 48 + multiplier; i <= 55 + multiplier; i++)
-            {
-                instantaneousFlow.Append(message[i]);
-            }
-            var _instantaneousFlow = float.Parse(instantaneousFlow.ToString()) / 1000;
             Console.WriteLine("瞬时流量:" + signDelivery + _instantaneousFlow + "m3/h");
-
-
-            StringBuilder loseFlow = new StringBuilder("");//负累积流量 --缩小 10 倍为实际数值，单位： m3
-            for (int i = 56 + multiplier; i <= 63 + multiplier; i++)
-            {
-                loseFlow.Append(message[i]);
-            }
-            var _loseFlow = float.Parse(loseFlow.ToString()) / 10;
             Console.WriteLine("负累积流量:" + signDelivery + _loseFlow + "m3");
-
-
-            StringBuilder loseRunTime = new StringBuilder("");//负累积运行时间 --单位: h
-            for (int i = 64 + multiplier; i <= 71 + multiplier; i++)
-            {
-                loseRunTime.Append(message[i]);
-            }
-            var _loseRunTime = int.Parse(loseRunTime.ToString());
             Console.WriteLine("负累积运行时间:" + _loseRunTime + "h");
-
-
-            StringBuilder positiveFlow = new StringBuilder("");//正累积流量 --缩小 10 倍为实际数值，单位： m3
-            for (int i = 72 + multiplier; i <= 79 + multiplier; i++)
-            {
-                positiveFlow.Append(message[i]);
-            }
-            var _positiveFlow = float.Parse(positiveFlow.ToString()) / 10;
             Console.WriteLine("正累积流量:" + _positiveFlow + "m3");
-
-
-
-            StringBuilder positiveRunTime = new StringBuilder("");//正累积运行时间 --单位: h
-            for (int i = 80 + multiplier; i <= 87 + multiplier; i++)
-            {
-                positiveRunTime.Append(message[i]);
-            }
-            var _positiveRunTime = int.Parse(positiveRunTime.ToString());
             Console.WriteLine("正累积运行时间:" + _positiveRunTime + "h");
-
-
-            StringBuilder waterTemperature = new StringBuilder("");//水温 --缩小 100 倍为实际数值，单位： ℃
-            for (int i = 88 + multiplier; i <= 95 + multiplier; i++)
-            {
-                waterTemperature.Append(message[i]);
-            }
-            var _waterTemperature = float.Parse(waterTemperature.ToString()) / 100;
             Console.WriteLine("水温:" + _waterTemperature + "℃");
-
-
-            StringBuilder pressure = new StringBuilder("");//压力 --缩小 1000 倍为实际数值，单位： mpa
-            for (int i = 96 + multiplier; i <= 103 + multiplier; i++)
-            {
-                pressure.Append(message[i]);
-            }
-            var _pressure = float.Parse(pressure.ToString()) / 1000;
             Console.WriteLine("压力:" + _pressure + "mpa");
-
-
-            StringBuilder diagnose = new StringBuilder("");//诊断代码(仪表故障码) --当设备上报 0x06 故障时，不应再上报其他故障。
-            for (int i = 104 + multiplier; i <= 105 + multiplier; i++)
-            {
-                diagnose.Append(message[i]);
-            }
             typeMalfunction(diagnose);
 
             //数据校验 --瞬时流量符号-故障代码