1118OPSSNew/Assets/3rdParty/MSG-Machinery/Plugins/MGS/MGS.CurveHose.xml

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>MGS.CurveHose</name>
    </assembly>
    <members>
        <member name="T:MGS.CurveHose.BezierHose">
            <summary>
            Render dynamic hose mesh base on cubic bezier curve.
            </summary>
        </member>
        <member name="F:MGS.CurveHose.BezierHose.anchor">
            <summary>
            Anchor points of hose curve.
            </summary>
        </member>
        <member name="P:MGS.CurveHose.BezierHose.StartPoint">
            <summary>
            Start point of hose curve.
            </summary>
        </member>
        <member name="P:MGS.CurveHose.BezierHose.EndPoint">
            <summary>
            End point of hose curve.
            </summary>
        </member>
        <member name="P:MGS.CurveHose.BezierHose.StartTangentPoint">
            <summary>
            Start tangent point of hose curve.
            </summary>
        </member>
        <member name="P:MGS.CurveHose.BezierHose.EndTangentPoint">
            <summary>
            End tangent point of hose curve.
            </summary>
        </member>
        <member name="P:MGS.CurveHose.BezierHose.Curve">
            <summary>
            Curve for hose.
            </summary>
        </member>
        <member name="F:MGS.CurveHose.BezierHose.curve">
            <summary>
            Curve of hose.
            </summary>
        </member>
        <member name="M:MGS.CurveHose.BezierHose.Rebuild">
            <summary>
            Rebuild the mesh of hose.
            </summary>
        </member>
        <member name="T:MGS.CurveHose.CircleHose">
            <summary>
            Render dynamic hose mesh base on circle curve.
            </summary>
        </member>
        <member name="F:MGS.CurveHose.CircleHose.extendRadius">
            <summary>
            Extend radius of hose curve.
            </summary>
        </member>
        <member name="P:MGS.CurveHose.CircleHose.Curve">
            <summary>
            Curve for hose.
            </summary>
        </member>
        <member name="F:MGS.CurveHose.CircleHose.curve">
            <summary>
            Curve of hose.
            </summary>
        </member>
        <member name="M:MGS.CurveHose.CircleHose.Rebuild">
            <summary>
            Rebuild the mesh of hose.
            </summary>
        </member>
        <member name="T:MGS.CurveHose.EllipseHose">
            <summary>
            Render dynamic hose mesh base on ellipse curve.
            </summary>
        </member>
        <member name="F:MGS.CurveHose.EllipseHose.semiMinorAxis">
            <summary>
            Semi minor axis of ellipse.
            </summary>
        </member>
        <member name="F:MGS.CurveHose.EllipseHose.semiMajorAxis">
            <summary>
            Semi major axis of ellipse.
            </summary>
        </member>
        <member name="P:MGS.CurveHose.EllipseHose.Curve">
            <summary>
            Curve for hose.
            </summary>
        </member>
        <member name="F:MGS.CurveHose.EllipseHose.curve">
            <summary>
            Curve of hose.
            </summary>
        </member>
        <member name="M:MGS.CurveHose.EllipseHose.Rebuild">
            <summary>
            Rebuild hose.
            </summary>
        </member>
        <member name="T:MGS.CurveHose.HelixHose">
            <summary>
            Render dynamic hose mesh base on helix curve.
            </summary>
        </member>
        <member name="F:MGS.CurveHose.HelixHose.topEllipse">
            <summary>
            Top ellipse args of curve.
            </summary>
        </member>
        <member name="F:MGS.CurveHose.HelixHose.bottomEllipse">
            <summary>
            Bottom ellipse args of curve.
            </summary>
        </member>
        <member name="F:MGS.CurveHose.HelixHose.maxRadian">
            <summary>
            Max around radian of helix.
            </summary>
        </member>
        <member name="P:MGS.CurveHose.HelixHose.Curve">
            <summary>
            Curve for hose.
            </summary>
        </member>
        <member name="F:MGS.CurveHose.HelixHose.curve">
            <summary>
            Curve of hose.
            </summary>
        </member>
        <member name="M:MGS.CurveHose.HelixHose.Rebuild">
            <summary>
            Rebuild hose.
            </summary>
        </member>
        <member name="T:MGS.CurveHose.HermiteHose">
            <summary>
            Render dynamic hose mesh base on hermite curve.
            </summary>
        </member>
        <member name="F:MGS.CurveHose.HermiteHose.close">
            <summary>
            Hose curve is close?
            </summary>
        </member>
        <member name="F:MGS.CurveHose.HermiteHose.anchors">
            <summary>
            Anchors of hose curve.
            </summary>
        </member>
        <member name="P:MGS.CurveHose.HermiteHose.AnchorsCount">
            <summary>
            Count of hose curve anchors.
            </summary>
        </member>
        <member name="P:MGS.CurveHose.HermiteHose.Curve">
            <summary>
            Curve for hose.
            </summary>
        </member>
        <member name="F:MGS.CurveHose.HermiteHose.curve">
            <summary>
            Anchor curve of hose.
            </summary>
        </member>
        <member name="M:MGS.CurveHose.HermiteHose.Rebuild">
            <summary>
            Rebuild the mesh of hose.
            </summary>
        </member>
        <member name="M:MGS.CurveHose.HermiteHose.AddAnchor(UnityEngine.Vector3)">
            <summary>
            Add anchor item.
            </summary>
            <param name="item">Anchor item.</param>
        </member>
        <member name="M:MGS.CurveHose.HermiteHose.InsertAnchor(System.Int32,UnityEngine.Vector3)">
            <summary>
            Insert Anchor item at index.
            </summary>
            <param name="index">Index of anchor.</param>
            <param name="item">Anchor item.</param>
        </member>
        <member name="M:MGS.CurveHose.HermiteHose.SetAnchorAt(System.Int32,UnityEngine.Vector3)">
            <summary>
            Set the anchor item at index.
            </summary>
            <param name="index">Index of anchor.</param>
            <param name="item">Anchor item.</param>
        </member>
        <member name="M:MGS.CurveHose.HermiteHose.GetAnchorAt(System.Int32)">
            <summary>
            Get the anchor item at index.
            </summary>
            <param name="index">Anchor index.</param>
            <returns>Anchor item.</returns>
        </member>
        <member name="M:MGS.CurveHose.HermiteHose.RemoveAnchor(UnityEngine.Vector3)">
            <summary>
            Remove the anchor item.
            </summary>
            <param name="item">Anchor item.</param>
        </member>
        <member name="M:MGS.CurveHose.HermiteHose.RemoveAnchorAt(System.Int32)">
            <summary>
            Remove the anchor item at index.
            </summary>
            <param name="index">Anchor index.</param>
        </member>
        <member name="M:MGS.CurveHose.HermiteHose.ClearAnchors">
            <summary>
            Clear all anchor items.
            </summary>
        </member>
        <member name="T:MGS.CurveHose.ICurveHose">
            <summary>
            Interface of curve hose.
            </summary>
        </member>
        <member name="P:MGS.CurveHose.ICurveHose.Polygon">
            <summary>
            Polygon of hose cross section.
            </summary>
        </member>
        <member name="P:MGS.CurveHose.ICurveHose.Segment">
            <summary>
            Segment length of subdivide hose.
            </summary>
        </member>
        <member name="P:MGS.CurveHose.ICurveHose.Radius">
            <summary>
            Radius of hose mesh.
            </summary>
        </member>
        <member name="P:MGS.CurveHose.ICurveHose.Seal">
            <summary>
            Is seal at both ends of hose?
            </summary>
        </member>
        <member name="T:MGS.CurveHose.MonoCurveHose">
            <summary>
            Render dynamic hose mesh base on center curve.
            </summary>
        </member>
        <member name="F:MGS.CurveHose.MonoCurveHose.polygon">
            <summary>
            Polygon of hose cross section.
            </summary>
        </member>
        <member name="F:MGS.CurveHose.MonoCurveHose.segment">
            <summary>
            Segment length of subdivide hose.
            </summary>
        </member>
        <member name="F:MGS.CurveHose.MonoCurveHose.radius">
            <summary>
            Radius of hose mesh.
            </summary>
        </member>
        <member name="F:MGS.CurveHose.MonoCurveHose.seal">
            <summary>
            Is seal at both ends of hose?
            </summary>
        </member>
        <member name="P:MGS.CurveHose.MonoCurveHose.Polygon">
            <summary>
            Polygon of hose cross section.
            </summary>
        </member>
        <member name="P:MGS.CurveHose.MonoCurveHose.Segment">
            <summary>
             Segment length of subdivide hose.
            </summary>
        </member>
        <member name="P:MGS.CurveHose.MonoCurveHose.Radius">
            <summary>
            Radius of hose mesh.
            </summary>
        </member>
        <member name="P:MGS.CurveHose.MonoCurveHose.Seal">
            <summary>
            Is seal at both ends of hose?
            </summary>
        </member>
        <member name="P:MGS.CurveHose.MonoCurveHose.MaxKey">
            <summary>
            Max key of hose center curve.
            </summary>
        </member>
        <member name="P:MGS.CurveHose.MonoCurveHose.Length">
            <summary>
            Length of hose center curve.
            </summary>
        </member>
        <member name="P:MGS.CurveHose.MonoCurveHose.Curve">
            <summary>
            Curve for hose.
            </summary>
        </member>
        <member name="F:MGS.CurveHose.MonoCurveHose.CircleRadian">
            <summary>
            Radian of circle.
            </summary>
        </member>
        <member name="F:MGS.CurveHose.MonoCurveHose.Delta">
            <summary>
            Delta to calculate tangent.
            </summary>
        </member>
        <member name="F:MGS.CurveHose.MonoCurveHose.length">
            <summary>
            Length of hose center curve.
            </summary>
        </member>
        <member name="F:MGS.CurveHose.MonoCurveHose.segmentCount">
            <summary>
            Segment count of subdivide hose.
            </summary>
        </member>
        <member name="M:MGS.CurveHose.MonoCurveHose.RebuildMesh(UnityEngine.Mesh)">
            <summary>
            Rebuild the mesh of hose.
            </summary>
        </member>
        <member name="M:MGS.CurveHose.MonoCurveHose.CreateVertices(System.Boolean)">
            <summary>
            Create the vertices of hose mesh.
            </summary>
            <param name="isSeal">Is seal at both ends of hose?</param>
            <returns>Vertices array.</returns>
        </member>
        <member name="M:MGS.CurveHose.MonoCurveHose.CreateTriangles(System.Boolean)">
            <summary>
            Create triangles of hose mesh.
            </summary>
            <param name="isSeal">Is seal at both ends of hose?</param>
            <returns>Triangles array.</returns>
        </member>
        <member name="M:MGS.CurveHose.MonoCurveHose.CreateSideTriangles">
            <summary>
            Create triangles of hose side mesh.
            </summary>
            <returns></returns>
        </member>
        <member name="M:MGS.CurveHose.MonoCurveHose.CreateUV(System.Boolean)">
            <summary>
            Create uv of hose mesh.
            </summary>
            <param name="isSeal">Is seal at both ends of hose?</param>
            <returns>UV array.</returns>
        </member>
        <member name="M:MGS.CurveHose.MonoCurveHose.Rebuild">
            <summary>
            Rebuild the mesh of hose.
            </summary>
        </member>
        <member name="M:MGS.CurveHose.MonoCurveHose.GetPointAt(System.Single)">
            <summary>
            Get point from center curve of hose at key.
            </summary>
            <param name="key">Key of hose center curve.</param>
            <returns>Point on hose curve at key.</returns>
        </member>
        <member name="T:MGS.CurveHose.SinHose">
            <summary>
            Render dynamic hose mesh base on sin curve.
            </summary>
        </member>
        <member name="F:MGS.CurveHose.SinHose.args">
            <summary>
            Args of sin curve.
            </summary>
        </member>
        <member name="F:MGS.CurveHose.SinHose.maxKey">
            <summary>
            Max key of sin curve.
            </summary>
        </member>
        <member name="P:MGS.CurveHose.SinHose.Curve">
            <summary>
            Curve for hose.
            </summary>
        </member>
        <member name="F:MGS.CurveHose.SinHose.curve">
            <summary>
            Curve of hose.
            </summary>
        </member>
        <member name="M:MGS.CurveHose.SinHose.Rebuild">
            <summary>
            Rebuild hose.
            </summary>
        </member>
    </members>
</doc>